Brush-On GripTread

Hilltronix Brush-on GripTread is a flexible non-slip rubber-like coating that quickly cures to a flexible slip resistant surface using a proprietary grit.  Displays excellent chemical resistance to acids, bases, hydrocarbons and other harsh chemicals, while exhibiting excellent UV Stability.

Hilltronix Brush-On GripTread is Ready-To-Go. Easily applied with just a brush or roller.  Requires no mixing of chemicals.  Has a fast setup time and is ready for light traffic in 6-8 hours, and heavy traffic in 24 hours.  Hilltronix Brush-On GripTread aids in the reduction of slip and fall accidents.

Available in 29 colors. Can be applied to most surfaces. May need to be re-applied as needed.  Designed for use on concrete, steel, aluminum, wood, fiberglass, and other surfaces where a slip-resistant finish is desired.

Hilltronix Brush-On GripTread provides a high performance chemical resistant, industrial grade air dry elastomeric, polymeric, slip resistant surface designed to take the place of grip tapes.

Hilltronix Brush-On GripTread has excellent resistance to most acids, bases, and hydrocarbons.

Easy Application:

1.  Clean surface.  Remove all loose dirt, rust and oil, grease, or waxy residues from surface.

2.  Tape off area.

3.  Apply with a paint brush, or roller.

4.  Remove tape before Hilltronix Brush-On GripTread dries.

5. Allow 24 hours for full cure

Apply Hilltronix Brush-On GripTread to: wood, metal, concrete, vinyl, and PVC

Technical Data:

UV Resistance:  Excellent

Excellent temperature range:  -40°F to 280°F.

Excellent resistance to:  moisture, hydrocarbons, solvents, gasoline, oil, diesel fuel, acids, bases, abrasion, weathering, skidding/slipping, and corrosion

High Solids:  19%

Resistance to water:  Excellent

Coverage:  40 ft²/Gollon

Setup time:

Dry to the touch:  30-45 minutes

Full cure:24 hours

Finish:  Flat or Glossy

Available in:  quarts, gallons

MSDS Sheet