MRO Solutions anaerobic compounds are formulated for use in threadlocking, sealing, joining, fastening and retaining applications of metal components. Unlike conventional anaerobics, MRO compounds are non-surface sensitive so they do not require use of primers for curing.
MRO Solutions anaerobics will reduce inventory costs by eliminating the need for mechanical locking devices, such as plastic inserts, lock washers, set screws, lock nuts and cotter pins. Machining and assembly costs will also be reduced. The gap filling capability of the MRO anaerobics allows for greater tolerances between parts.
Once parts are mated with MRO anaerobics, they form a unitized assembly that resists vibration. In addition, the mated parts are sealed against attack from corrosion, internal rust, seizure, solvents, gases, and other chemicals.
|
|
THREADLOCKERS |
|
SOLUTION
10 |
SOLUTION
11 |
SOLUTION
12 |
SOLUTION
14 |
SOLUTION
15 |
|
LIQUID
STATE |
TYPE |
MEDIUM
STRENGTH |
HIGH
STRENGTH |
WICKING
GRADE |
HIGH
STRENGTH |
LOW
STRENGTH |
|
COLOR |
BLUE |
RED |
GREEN |
RED |
PURPLE |
|
VISCOSITY 9cP)
ASTM 1084, 1824 |
900-5000 |
450-550 |
10-25 |
6000-8000 |
900-5000 |
|
FIXTURE TIME (min) |
5-15 |
5-15 |
1-10 |
5-15 |
5-15 |
|
WORKING TIME (hrs) |
2 |
2 |
1 |
2 |
2 |
|
FULL STRENGTH (hrs) |
24 |
24 |
24 |
24 |
24 |
|
GAP FILLED (inch) |
0.01 |
0.008 |
0.002 |
0.01 |
0.01 |
|
SPECIFIED GRAVITY |
1.11 |
1.1 |
1.08 |
1.11 |
1.07 |
|
FLASH PONT (F, TOC) |
219 |
219 |
219 |
219 |
219 |
|
CORROSIVITY (9MIL-S-22473D) |
NONE |
NONE |
NONE |
NONE |
NONE |
|
TOXICITY |
LOW |
LOW |
LOW |
LOW |
LOW |
|
SHELF LIFE (MINIMUM) |
1 YEAR |
1 YEAR |
1 YEAR |
1 YEAR |
1 YEAR |
|
SOLUBLE IN |
ACETONE, MEK |
|
CURED
STATE |
LOCKING TORQUE BREAKAWAY |
50-105 |
175-260 |
50-105 |
220-305 |
25-70 |
|
PREVAIL (in lbs) |
60-130 |
215-305 |
170-350 |
170-260 |
15-60 |
|
SHEAR STRENGTH (lb/in) |
1140-2130 |
2840-4970 |
2130-3550 |
2840-4970 |
570-990 |
|
SERVICE TEMPERATURE |
-65 to +300F** |
-65 to +300F** |
-65 to +300F** |
-65 to +300F** |
-65 to +300F** |
|
LINEAR EXPANSION (mm/C) |
15X10 5 |
8X10 5 |
7.3X10 5 |
8X10 5 |
15X10 5 |
|
HARDNESS:ROCKWELL |
R65 |
M110 |
M89 |
M110 |
R65 |
|
DECOMPOSITION TEMP. (F) |
432 |
486 |
537 |
504 |
410 |
|
*TYPICAL VALUE BASED ON 3/16" PHOSPHATE STEEL BOLTS
** -54 TO +149 C
*** -54 TO +232 C
DISCLAIMER
The information contained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of the data or the results to be obtained from the use thereof. Because the information contained herein may be applied under conditions beyond our control, we assume no responsibility for its use. | |
