Mixing Hilltronix Tints with Plasti Dip
1. Place a small amount of Hilltronix Pigment into a container.
2. Next Place a small amount of
Plasti Dip Thinner into the same container.
3. Mix thoroughly. Smashing the pigment against the side of the container. Till there are no lumps. (Consistency should be like a thick gravy.)
4. Next take a small amount of
Plasti Dip and dump into same container.
5. Again mix thoroughly smashing the Plasti Dip, Thinner and Pigment against the container.
6. When you have no lumps. Slowly add to the rest of your Plasti Dip until desired color has been achieved.
Hint: Stir slowly so you don't stirred air bubbles into Plasti Dip. They are almost impossible to get out.
|
Mixing Hilltronix Tints with other Paints
1. Place a small amount of Hilltronix Pigment into a container.
2. Next Place a small amount of recommended thinner into the same container. If Paint is real thin do not use any thinner.
3. Mix thoroughly. Smashing the pigment against the side of the container. Till there are no lumps. (Consistency should be like a thick gravy.)
4. Next take a small amount of Paint and dump into same container.
5. Again mix thoroughly smashing the paint, Thinner and Pigment against the container.
6. When you have no lumps. Slowly add to the rest of your paint until desired color has been achieved.
Hint: Mix slowly so you don't stirred air bubbles into Paint
|